Call Us: +8615954941919 interested in Contact Us? Mail us now
English
Aluminum plate is the thickness of above 0.2mm to below 500mm, more than 200mm width, length within 16m aluminum material called aluminum plate or aluminum sheet, below 0.2mm for aluminum,200mm width within the bar or bar (of course, with the progress of large equipment, the widest can do 600mm aluminum plate is also more).
Chemical Element | Weight (%) |
Aluminum, Al | 89.8 - 94 |
Magnesium, Mg | 5-6 |
Manganese, Mn | 0.60-1.2 |
Iron, Fe | ≤ 0.50 |
Silicon, Si | ≤ 0.45 |
Zinc, Zn | 0.40 - 0.90 |
Chromium, Cr | ≤ 0.25 |
Copper, Cu | ≤ 0.25 |
Titanium, Ti | ≤ 0.20 |
Zirconium, Zr | 0.050 - 0.25 |
Other (each) | ≤ 0.050 |
Other (total) | ≤ 0.15 |
–O hardening
Unhardened 5059 has a yield strength of 160 MPa (23 ksi) and ultimate tensile strength of 330 MPa (48 ksi) from −28 to 100 °C (−18 to 212 °F). At cryogenic temperatures it is slightly stronger; above 100 °C (212 °F) its strength is reduced.
Elongation, the strain before material failure, is 24% at room temperature.
–H131 hardening
yield strength of 39.0 ksi (269 MPa), ultimate tensile strength of 52.9 ksi (365 MPa). Produced by Aleris under the AluStar brand. [2]
–H136 hardening
yield strength of 39.0 ksi (269 MPa), ultimate tensile strength of 52.1 ksi (359 MPa). Produced by Aleris under the AluStar brand.
–H321 hardening
H321 strain hardened 5059, with properties measured at 20 °C (68 °F), has yield strength of 270 MPa (39 ksi), ultimate tensile strength of 370 MPa (54 ksi), and elongation of 10%.
Kuaima steel has extensive industry experience, an expert staff, and state-of-the-art equipment.
Please leave your email , our experts will contact you as soon as possible
